Videos

You can see our Thread Verification Units in action to determine which one may be appropriate for your application.


 

DG-1

New Vista TVM-DG – Thread Verification Machine

ESC-1

TVM-ESC – Verifying small nuts.

ESC-2

TVM-ESC – Verifying small nuts.

ESC-3

TVM-ESC module verifying large nuts.

ESC-4

TVM-ESC – Inserts(F)

ESC-5

TVM-ESC – Brackets

ESC-6

TVM-ESC verifying small brass inserts

FLX-2

TVM-FLX — Pulley with 4 holes

FLX-3

TVM-FLX – Die Cast Alternator Covers

FLX-4

TVS-FLX – Seat Bracket

FLX-5

TVS-FLX – CV Joint – Broken tap

FLX-7

TVS-FLX – Changing Center Distance

FLX-8

TVS-FLX – Flange – 8 Spindle

FLX-9

TVS-FLX – Bracket – 4-Spindle

FLX-10

TVS-FLX – Tool Change Close up

FLX-11

TVS-FLX with four (4) DRGN Off-Axis spindles.

FLX-12

TVS-FLX – hand loaded 6 spindle unit for torque converters.

FLX-15

38-Spindle TVS-FLX Head

IL-2

TVS-IL In-Line Oil filters

IND-2

TVS-IND – Thread gaging and inspecting journal OD.

IND-3

TVM-IND-V (Vertical)

OAA-1

Off-Axis Adapter – AD type

RBT-1

TVU-STH (Robot) – Automatic tool change

RI-1

TVM-MGR – Sequential on BC

RSC-1

TVU-RSC Station running verification on Large Nuts

RSC-2

TVU-RSC Thread Verification Station having tooling changed to Left Hand thread.

SC-1

TVM-SC – Customer demo

SC-2

TVM-SC – Go, then No Go inspection

SC-3

TVM-SC – 2 spindle module

SC-4

TVM-SC – External and Internal Thread Verification

SC-5

TVM-SC – Ballstuds (ext)

SC-6

TVM-SC – verifying fittings

SC-7

TVM-SC – Endpieces

SC-8

TVM-SC – Cylinder Neck

SC-9

TVM-SC – Flat Stampings–3.5s

SC-10

TVM-SC – Flanged Shafts (Auto Sort)

SC-11

TVM-SC — Projectile Bodies (Auto Sort)

SC-12

TVM-SC – Large Thread

SC-13

TVM-SC – Projectile Bodies (Auto Sort)

SC-14

TVM-SC-4 – Valve Bodies – External

SC-16

TVM-SC – External Tube – Retract and Stop

SC-17

TVM-SC – Large Stamped Nuts (changeover)

SC-18

TVM-SC – LARGE STAMPED NUTS CHANGEOVER

SC-19

TVM-SC – CHASING EXTERNAL THREADS

SC-20

TVM-SC – DROP IN FIXTURES WITH HAND CLAMPS

SR-1

TVS-SR – Axles, External

STH-1

TVU-STH – on RAM-250 pneumatic slide

STH-2

TVU-STH – Cast w/ depth sense

STH-3

TVU-STH Station for verifying transmission shafts.

STH-4

TVU-STH with Indexing Fixture verifying multiple holes in Axle Flange

SV-1

TVS-SV – Cast Tool Change old parts

SV-2

TVS-SV – Engine Mount: old parts:

SV-3

TVS-SV – 6 Lug Torque Converters old parts

SV-4

TVS-SV – Tool Change: new parts:

SV-5

TVS-SV – Transmission Case w/ M10x1.5 on one side, and M8x1.25 on the other.

TCU-1

Thread Chasing – Rear cradle (side)

TCU-2

Thread Chasing – Rear cradle (front)

TCU-3

Thread chasing – front cradle (front)

TVST-1

TVST – Part Rotates

TVU-1

TVU – External Thread

TVU-3

TVU – with Combo Gage & AD-420

VTG-5

New Vista Model TG 3B – Chasing threads on a Brake Caliper

VTG-6

New Vista Model TG 1A – Thread Verification on Lower Crankcase (Note: Use of Stall Collars)

VTG-8

TG-3B Verifies four M6 holes in Transmission Case